Site Navigation

Choose Language

iMac Intel 27" EMC 2309 and 2374 RAM Installation

iMac Intel 27" EMC 2309 and 2374 RAM Installation

Upgrade your iMac's RAM for an instant boost in speed.

Step 1 Access Door  ¶ 

Image 1/2: These screws will remain captive in the access door. Image 2/2: Remove the access door from your iMac.

Step 1 Access Door  ¶ 

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • These screws will remain captive in the access door.

  • Remove the access door from your iMac.

  • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

Step 2 RAM Installation  ¶ 

Image 1/1:

Step 2 RAM Installation  ¶ 

  • Use your fingers or the tip of a spudger to slide the black plastic RAM tray pull tab out of the RAM slot.

Step 3  ¶ 

Image 1/2: Use your fingers to slide the RAM module out of its socket. Image 2/2: If necessary, repeat this process for the other RAM modules(s).

Step 3  ¶ 

  • Pull the black plastic tab away from the iMac to eject the RAM module from its socket.

  • Use your fingers to slide the RAM module out of its socket.

  • If necessary, repeat this process for the other RAM modules(s).

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

No comments.

Add Comment