Site Navigation

Choose Language

Tools

Parts

Introduction

Upgrade your RAM for an instant increase in speed.

Image 1/2: Both screws remain captive within the access door. Image 2/2: Remove the access door.
  • Loosen the two Phillips screws securing the access door to your iMac.

  • Both screws remain captive within the access door.

  • Remove the access door.

Add Comment

Image 1/1:
  • Pull both RAM arms away from the iMac to release both RAM chips from their sockets.

Add Comment

Image 1/1: During reinstallation, make sure both RAM arms are fully rotated outward before inserting the RAM modules. Use your thumbs to seat the new RAM modules into their sockets and then press the RAM arms back into the iMac.
  • Pull both RAM modules out of their slots.

  • During reinstallation, make sure both RAM arms are fully rotated outward before inserting the RAM modules. Use your thumbs to seat the new RAM modules into their sockets and then press the RAM arms back into the iMac.

  • It is normal to encounter a fair amount of resistance when pushing the RAM arms back into the iMac.

Add Comment

Conclusion

To reassemble your device, just follow these instructions in reverse order.

Dozuki System

Member since: 09/24/2009

276 Guides authored

0 Comments

Add Comment