iMac Intel 27" EMC 2429 RAM Installation
Replace the RAM in an iMac Intel 27" EMC 2429.
- Author: iRobot
- Difficulty: Moderate
This guide will help you replace the RAM.
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
Step 1 — Access Door ¶
Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
These screws will remain captive in the access door.
Remove the access door from your iMac.
During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.
Step 2 — RAM Installation ¶
Use your fingers or the tip of a spudger to slide the black plastic RAM tray pull tab out of the RAM slot.
Step 3 ¶
Pull the black plastic tab away from the iMac to eject the RAM module from its socket.
Use your fingers to slide the RAM module out of its socket.
If necessary, repeat this process for the other RAM modules(s).
Comments Comments are onturn off