Site Navigation

Choose Language

Mac Pro Late 2013 RAM Replacement

Replace the RAM in your Mac Pro Late 2013.

Adding more RAM to your Mac Pro is easy and requires no tools. Use this guide to soup up your Pro.

Step 1 RAM  ¶ 

Image 1/2: Image 2/2:

Step 1 RAM  ¶ 

  • Slide the lock switch to the right, to the unlocked position.

Step 2  ¶ 

Image 1/3: It may help to push down on the center of the fan while lifting the case up. Image 2/3: It may help to push down on the center of the fan while lifting the case up. Image 3/3: It may help to push down on the center of the fan while lifting the case up.

Step 2  ¶ 

  • Lift the outer case straight up off the Mac Pro.

  • It may help to push down on the center of the fan while lifting the case up.

Step 3  ¶ 

Image 1/2: The RAM slots will pivot outward to allow access to the RAM modules. Image 2/2: The RAM slots will pivot outward to allow access to the RAM modules.

Step 3  ¶ 

  • Push the RAM release tab up.

  • The RAM slots will pivot outward to allow access to the RAM modules.

Step 4  ¶ 

Image 1/2: To install new RAM modules, insert a new module into the appropriate slot, in the proper orientation. Press the RAM module into the slot until it is bottomed, then push the RAM tray back into the side of the Mac Pro. Image 2/2: To install new RAM modules, insert a new module into the appropriate slot, in the proper orientation. Press the RAM module into the slot until it is bottomed, then push the RAM tray back into the side of the Mac Pro.

Step 4  ¶ 

  • Using two hands, pull the desired RAM module straight out of its slot.

  • To install new RAM modules, insert a new module into the appropriate slot, in the proper orientation. Press the RAM module into the slot until it is bottomed, then push the RAM tray back into the side of the Mac Pro.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

No comments.

Add Comment