Mac Mini Mid 2010 RAM Installation

Upgrade the RAM for overall faster performance.

  • Author: iRobot
  • Time required: 5 minutes
  • Difficulty: Very easy

Upgrading the RAM on the mid 2010 Mac Mini is an easy task that requires no tools.

Sections
Relevant Parts
Image #1

Step 1 Bottom Cover  ¶ 

  • Place your thumbs in the depressions cut into the bottom cover.

  • Rotate the bottom cover counter-clockwise until the white dot painted on the bottom cover is aligned with the ring inscribed on the outer case.

Image #1

Step 2  ¶ 

  • Tilt the mini enough to allow the bottom cover to fall away from the outer case.

  • Remove the bottom cover and set it aside.

Image #1

Step 3 RAM Installation  ¶ 

  • Release the tabs on each side of the RAM chip by simultaneously pushing each tab away from the RAM.

  • These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

  • After the RAM chip has popped up, pull it straight out of its socket.

  • Repeat this process if a second RAM chip is installed.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Mac Mini Mid 2010 category page.

Comments Comments are onturn off

No comments.