Site Navigation

Choose Language

Tools

Parts

Introduction

Use this guide to replace or upgrade your iMac's RAM for an instant speed boost.

Image 1/1: Loosen the single Phillips screw in the center of the access door.
  • Lay your iMac front side down on a table with the lower edge facing yourself.

  • Loosen the single Phillips screw in the center of the access door.

  • This screw is captive in the access door.

  • Remove the access door from your iMac.

Add Comment

Image 1/2: Pull the black plastic RAM tab away from your iMac to eject the RAM module. Image 2/2: Pull the black plastic RAM tab away from your iMac to eject the RAM module.
  • Use the flat end of a spudger to pull the black plastic RAM tabs out of the memory bay.

  • Pull the black plastic RAM tab away from your iMac to eject the RAM module.

Add Comment

Image 1/1: If two RAM modules are installed, repeat this process for the other module.
  • Grab the RAM module by its edges and pull it straight out of its slot.

  • If two RAM modules are installed, repeat this process for the other module.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dozuki System

Member since: 09/24/2009

259 Guides authored

0 Comments

Add Comment